ISONOD STICK

$ 188.053,00

The IsoNOD Stick is a power supply for 10 pedals, with the advantage that one of the outputs is isolated, intended for pedals that often suffer from power-related interference. It integrates a powerful regulator and careful filtering to control the noise level.
The isolated output is ideal for powering modern digital pedals such as Strymon, Eventide, Line 6, TC Electronic, etc., as well as pedals with positive ground like Germanium transistor fuzz pedals.
Another advantage of this design is that there is no consumption limit on the outputs; each pedal takes what it needs as long as the total consumption of 1000 milliamps is not exceeded.
It includes a universal 110/220V transformer (works worldwide) and 10 power cables with 2.1mm barrel plug connectors, straight and angled, with negative polarity center. Optional polarity and/or connector change (contact the seller and/or manufacturer).

Note: For powering Line 6 Stompboxes (DL4, MM4, DM4, and FM4), and Eventide models, a special cable is required. Please contact the seller and/or manufacturer to purchase it.

Category:
Description

Input voltage: 12V DC.
Output voltage: 9V DC on each output.
Current: 1000mA with no limit per output; each pedal takes what it needs as long as we do not exceed the maximum total amperage.
Dimensions: 130 x 49 x 29mm
Weight: 240g
Short-circuit and overheating protection: In the event of a short circuit or overheating, the IsoNOD Stick automatically shuts down, protecting everything it powers. Once the problem is detected and resolved, the IsoNOD Stick turns back on instantly.