ISO NOD +
$ 234.626,00
The IsoNOD+ is a power supply for 10 pedals, divided into three parts: two isolated outputs intended for pedals that often suffer from power-related interference, and a group of 8 parallel outputs for pedals with classic power consumption. All outputs are regulated and filtered to control the noise level. The isolated outputs are ideal for powering modern digital pedals such as Strymon, Eventide, Line 6, TC Electronic, etc. Output 1 supports high consumption (1200mA), ideal for multi-effects units like the HX Stomp.
Includes Interlock cable and 10 power cables with 2.1mm barrel plug connectors, straight and angled, with negative polarity center. Optional polarity and/or connector change (contact the seller and/or manufacturer).
Note: For powering Line 6 Stompboxes (DL4, MM4, DM4, and FM4), HX Stomp, and Eventide models, a special cable is required. Please contact the seller and/or manufacturer to purchase it.
1 in stock
Description
Input voltage: 110/220V AC.
Output voltage: 9V DC on each output.
Current: Output 1 supports 1200mA and Output 2 supports 400mA, both are isolated. Parallel outputs support a total of 400mA with no limit per output; each pedal takes what it needs as long as we do not exceed the maximum total amperage.
Short-circuit and overheating protection: Thanks to the technology of its voltage regulators, in the event of a short circuit or overheating, the IsoNOD+ automatically shuts down, protecting everything it powers. Once the problem is detected and resolved, the IsoNOD+ turns back on instantly. Input power protection: The IsoNOD+ has a drawer-style fuse holder, easily accessible under the interlock connector, with an active 1A fuse and a spare fuse in case replacement is needed.
Dimensions: 148 x 70 x 39mm
Weight: 470g
NOTE: The IsoNOD+ chassis is part of the circuit and works as a heat sink; it is normal for its temperature to increase under high load situations. This heat dissipation ensures that its components function correctly and without stress.
